download and install AT&T Samsung Galaxy S7 Edge Android 7.0 Nougat firmware OTA SM-G930A-G935A

Many variants of Samsung Galaxy S7 and S7 Edge are already running on the latest Android 7.0 Nougat firmware with build number G935FXXU1DPLT. The update is now available globally for European countries like UK, Germany and Asian countries like India, China, Korea, etc. The Samsung Nougat update arrives late in the United States as it depends on the carriers like Sprint, T-Mobile, Verizon, and AT&T. However, the AT&T Galaxy S7 & S7 Edge have received Nougat OTA updates with build numbers G930AUCU4BQA4 and G935AUCU4BQA4 respectively.

XDA forum members have captured the Android 7.0 Nougat OTA update for the AT&T variant of Galaxy S7. The Nougat update is not an Odin flashable firmware file with .tar extension. It comes in the form of captured OTA zip file. This is because AT&T does not release the full stock firmware for their devices. You will have to update your device step by step using the OTA files listed below just like we did for the AT&T Galaxy S6 (Edge), Galaxy S7 (Edge), AT&T Note 5, S5 G900A, etc. The latest February security patch is also available with build number G935AUCU4BQA6.

Download AT&T Samsung Galaxy S7 (Edge) G935A/G930A Nougat OTA updates

OTA updates for Samsung Galaxy S7 G930A:

v2 (G930AUCU2APD1) to v3 (G930AUCS2APE1) update file
v3 (G930AUCS2APE1) to v4 (G930AUCS2APF21) update file
v4 (G930AUCS2APF2) to v5 (G930AUCU2APG1) update file
v5 (G930AUCU2APG1) to v6 (G930AUCS2APH1) update file
v6 (G930AUCS2APH1) to v7 (G930AUCS4API2) update file
v7 (G930AUCS4APK1) to unreleased (G930AUCU4BQA4) update file

OTA updates for Samsung Galaxy S7 Edge G935A:

v2 (G935AUCU2APD1) to v3 (G935AUCS2APE1) update file
v3 (G935AUCS2APE1) to v4 (G935AUCS2APF2) update file
v4 (G935AUCS2APF2) to v5 (G935AUCU2APG1) update file
v5 (G935AUCU2APG1) to v6 (G935AUCS2APH1) update file
v6 (G935AUCS2APH1) to v7 (G935AUCS4API2) update file
v7 (G935AUCS4API2) to v8 (G935AUCU4APJ4) update file
v8 (G935AUCS4APJ4) to unreleased (G935AUCU4BQA4) update file
v9 (G935AUCS4APK1) to unreleased (G935AUCU4BQA4) update file

v10 February 2017 security patch updates:

S4APJ4 to U4BQA6

Download full stock Odin flashable firmware:

You may want to try the Samfirm tool to download the latest Odin firmware directly from Samsung servers. Meanwhile, you can download the latest Nougat firmware for AT&T S7 Edge variants and update it via stock recovery or ADB sideload method.

Samsung Galaxy S7 Edge G935A full stock firmware G935AUCS4API2

Full Stock Firmware: Flashable via Odin with 4 separate files- PDA, CSC, Bootloader, etc. Download these and

Samsung Galaxy S7 G930A full stock firmware G930UUEU4API3

Full Stock Firmware: Flashable via Odin with 4 separate files- PDA, CSC, Bootloader, etc. Download these and

In case the update fails, you will need the Odin firmware files listed above to restore your device to complete stock. See: How to restore AT&T Samsung device to stock firmware using Odin?

Warning: This is not an official method. Hence, you should be cautious about it. This procedure may wipe your data and apps. So make sure you backup everything on your PC like Contacts, Messages, Applications, pictures, and videos with Smart Switch. Go through the prerequisites and then proceed with the instructions from below. Flashing the wrong file may brick the device. In that case, you will ned to flash the full firmware files listed above to restore via Odin.

How to Install AT&T Galaxy S7 & S7 Edge Android 7.0 Nougat firmware OTA update?

Flash the OTA files either via stock recovery by choosing apply updates from SD Card or via ADB sideload method. You will need to update your firmware gradually. These are incremental OTA updates. Meaning, you will need to check the firmware build number of your device and then flash the proper OTA file right next to it. If you are on v1 then go through v1>v2>v3>v4>v5>v6 and so on. Repeat the following steps for each OTA.


1. Verify your device for compatibility.

2. Make sure you have latest device drivers setup on your PC for a better connection. Get it from the official page of your device manufacturer.

3. Make sure that your Galaxy S7 Edge battery is fully charged

4. TURN OFF the Reactivation Lock – Go to Settings > PERSONAL > Lock screen and security > Find My Mobile and log in your Samsung Account. Then uncheck the Turn Reactivation lock on. This is only needed if you already turned-it-ON, from which you cannot modify the system when it’s turned-ON.

Installation Instructions

Step 1: Download the firmware or OTA file for your Android device. You don’t need to extract the file, just place the file in the phone storage where you can easily locate it.

Step 2: Reboot your S7 device into stock recovery. To do so, turn off the phone completely. Now Hold Volume Up + Home + Power until you see a little Android guy.

Step 3: Once into recovery, Select Apply update from SD card or External Storage.

Step 4: Reboot to system.

Step 5: Repeat for each version V1>V2>V3 and so on until you reach the last Nougat update.

That’s it wait for the operation to complete. Alternatively, if the above procedure fails, you can also manually flash it via ADB sideload. Check out the full tutorial from here.

Thanks to: @Jimmyvb98

Sarang Avatar

One response

  1. Justin Schreurs Avatar
    Justin Schreurs

    Wish someone would do this for Sprint.

Leave a Reply