Download Android 6.0.1 Marshmallow TouchWiz firmware from below. A new firmware update for Galaxy Note 4 N910F is now available for various regions and carrier devices. Including the Netherlands(Vodafone), Poland and several countries have been receiving the OK2, OJ3, OJ5, PE1 updates while other variants received the firmware builds to OI3. Firmware updates for a lot of Galaxy devices have been released by Samsung. One of them is the Samsung Galaxy Note 4 that just received the Android 5.1.1 Lollipop firmware. Although these are still Android 5.1.1 Lollipop and Android 6.0.1 Marshmallow based, a great deal for those who want to revert back to stock and grab the latest OTA updates as soon at it hits the device.
Some of the firmware updates are not yet available. However, they will be updated soon in the download section. Meanwhile, you can verify the firmware versions from the below links. The firmware update version OI3, OJ3, PE1 brings several security patches and bug fixes. You can also find some firmware based on carrier and country from the download section below. If you want to update or revert back to stock, this tutorial will help you with it. Before you proceed, it is highly recommended that you backup everything from Apps, Data, Media etc. It will perform a clean firmware flash via Odin and get you a brand new ROM. UPDATE: Official Android 6.0.1 Marshmallow N910FXXU1DPE1 firmware for Galaxy Note 4 SM-N910F is now available for the European countries like United Kingdom, Spain, Switzerland, Austria, Netherlands, Germany, France, Italy and much more.
|Model name||GALAXY Note4|
|Build date||Tue, 03 May 2016 09:56:03 +0000|
Download Android 6.0.1 Marshmallow For Note 4 N910F
Before you proceed to the download section, you can either download the firmware directly from Samsung with a new tool without any speed restrictions or subscription from the first link or get it from third party websites from link 2.
- Tool to Download Official Samsung Galaxy Note 4 Stock Firmware
→ Download | [Faster download method with no speed limit]
- Samsung Galaxy Note 4 N910F Android 6.0.1 Marshmallow
- Galaxy Note 4 Android 5.1.1 Lollipop Firmware
- Marshmallow Firmware Updates For all variants→ Link
- →Odin Software → Download [Mirror] | File: Odin3_v3.10.7_3.zip
- →Samsung Galaxy Drivers → Download | File: SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)
Warning: Although going through this procedure should not cause harm any damage to your device, it remains an unofficial process and you should be cautious about it. We won’t be liable for any damages or a broken device. Reader’s discretion is advised.
How to Install Android 6.0.1 Marshmallow Firmware Update For Galaxy Note 4 N910F
1. Verify your device for compatibility. The listed firmware is compatible with Samsung Galaxy Note 4 SM-N910F variant.
2. Enable USB Debugging on your device. To do so, go to Settings>About Phone> Tap on the Build Number several times until you get a new Developer Options in the Settings. Open Developer Options and enable USB Debugging from there. Trust the connection by allowing it when you connect it to your PC for the first time.
3. Make sure you have latest device drivers setup on your PC for a better connection. Get it from the download section official from the manufacturer.
4. To be sure, fully charge your device as the process make take a while.
Step 1: Download the listed firmware for your for your Galaxy device. Extract the zip file to get the firmware with .tar or .tar.md5 extension and place at a location where you can easily locate it in your PC.
Step 2: Now boot your device into Download/Odin Mode. To do so, turn off your device completely and then press and hold Power button + Volume Down + Home keys for a few seconds. If you see a warning sign press Volume up/ Volume down to get the Odin screen.
Step 3: If you already have Odin software on your PC then simply run the Odin3_3.10.7.exe file. If not, then download the Odin3.zip file from the download section and extract it. Run Odin software as administrator.
Step 4: While your device is still in the Odin Mode, connect your device to your PC using a USB cable.
Step 5: After a successful connection, the ID: COM in the Odin should turn Blue and an Added!! message should be displayed in the Log tab. In case your device doesn’t show up in Odin, then you can troubleshoot it with the steps given at the end of the tutorial.
Step 6: Now click on AP button and add the firmware file by navigating to the file path. Once added, it should show like this — File Path\N910FXXU1DPE1_N910FPHE1DPE1_PHE.zip.tar.md5
Step 7: Take care that only Auto Reboot and F.Reset Time are selected in the Options tab. Do not check Re-Partition.
Step 8: Once done, verify everything and proceed with installation by selecting Start button.
Step 9: When you get a PASS! message in the Log tab on your Odin software, that means firmware has successfully been installed and the device will restart itself. If not then reboot manually.
How to Fix Bootloop on Samsung Galaxy Note 4?
If you come across boot loop or your Samsung Galaxy device is stuck at the boot logo then factory reset your device from the recovery. To do so, turn off your device (also remove the battery if applicable and put it back again) and reboot into recovery mode by press and holding Power + Volume down + Home keys for a few seconds. From the Recovery, select Wipe Data / Factory Reset. Confirm the action and reboot once done. Your device should now boot up.
How to Troubleshoot Connectivity problem on Samsung Galaxy Device?
If your device doesn’t show up in the Odin software, then turn off USB Debugging and turn it on again and Reboot. You can also reinstall the Samsung USB Drivers or try changing the USB cable and connection ports from device manager.
Like and share us on social media. For any help or queries, comment down below.