Download Marshmallow For All LG V10 Variants From LG Servers

The US carriers are updating their LG V10 devices to the latest Marshmallow firmware. This time, the US cellular AT&T has stepped into the Android 6.0 update for its OEM device LG V10. This is followed by the T-Mobile (H90120E), Verizon (H90120e) that received the update in the past couple of months. Not to forget the international and other variants from Europe, Russia, Korea etc. as well. This brand new update will get your AT&T LG V10 H900 to firmware build number H90020J. The 20J is Android M version and brings many new features like the Doze mode, App permissions, new LG UI etc. along with some bug fixes and stability improvements. This guide will show you how to install Marshmallow on AT&T LG V10ย by restoring full stock Lollipop firmware and receive OTA notification.

The full KDZ firmware file isnโ€™t available at the moment and if your V10 is rooted, then you most likely wonโ€™t receiveย the update over the air. For that, you need to restore your LG device back to stock Android 5.1 Lollipop full firmware and later update it using the stock recovery. In other words, perform a clean firmware install by flashing the Lollipop KDZ file and then you should receive an OTA update notification. So grab the full TOT file from below and flash using the new LGUP tool.

ATT LG V10 Marshmallow information:

  • Android version: 6.0
  • Baseband Version: MPSS.BO.2.5.c10.1-00014-M8992FAAAANAZM-1.41087.1
  • Kernel Version: 3.10.84
  • Build Number: MRA58K
  • Software Version: H90020j
  • Upgrade file size:
    • H90010d > h90020j = 980 MB (Initial Release to MR2)
    • H90010f > h90020j = 980 MB (EMR1 to MR2)

Download AT&T LG V10 stock firmware file

  • Full Lollipop TOT file for AT&T LG V10ย H900V10f
    โ†’ Downloadย [Mirror]|ย File: LGH900AT-00-V10f-ATT-US-OCT-28-2015+0.rar (1.7G)
  • Marshmallow for AT&T LG V10 KDZย H90020J
    โ†’ Download [Mirror]| LGH900AT-00-20J-ATT-US.rar (Not yet availableโ€ฆ)
  • LGUP Download
    โ†’ Link | File 1:ย LGUP_8994_DLL_Ver_0_0_3_23.msi
    โ†’Link |ย File 2: LGUP_Store_Frame_Ver_1_14_3.msi
    โ†’ Mirror | LGUP File1, File 2
  • New LGUP with commn.dll fileย โ†’ Download | File: newlgup.rar
  • LGUP common.dll fileย โ†’ Download | File: common.zip
  • LG USB Drivers โ†’ย Windows | Mac
  • LG Bridgeย ย โ†’ Windows | Mac |ย Mirror

How to Restore AT&T LG V10 to Android 5.1.1 Lollipop Firmware With TOT File Using LGUP FlashTool

Step 1. Download both LGUP MSI filesย file from the download section above and install them on your PC. Also, downloadย the Stock H90010F firmware and place where the LGUP is located. Extract the

Step 2: Extract the rar/compressed file to get the TOT file.ย If it doesnโ€™t extract properly the first time, just re-download and try again.

Step 3. Boot your phone into Download Mode. To do so, disconnect USB cable then Power off the phone completely. Now hold Volume Up then plug in USB cable at the same time. Use MTP connectivity.

Step 4.ย Now open LGUP and select your phone model. If it says unknown, disconnect phone or reopen LGUP and try again.

LGUP-Flashtool-androidsage

Step 5.ย While LGUP is still open and your device connected with Download Mode, select the โ€œUpgradeโ€ option. If it fails, close the LGUP tool and selectย Upgradeย again. [Read notes from below]

Step 6. Now provideย the File Path and hit Start.

Step 7.ย Now wait for the installationย to finish.

Notes:ย 

To perform a Full Wipe and install MM/Lollipop โ€“ Open the LGUP on your computer. Provide the file path of the KDZ/TOT. Now this is important, Exit LGUP and run again once you set it as above. You will now notice that the KDZ will still be showing in the FILE PATH section. Now, select REFURBISH and make sure BIN file is ticked. Then Start the operation.

How to fix the LGUP canโ€™t load the model [C:\Program Files (x86)\LG Electronics\LGUP\model\com]

If for any reason LGUP doesnโ€™t wipe your data or you want to wipe it yourself, thenย simply boot into stock recovery after the flash and run a factory reset from there. Follow and like us on social media. For queries either comment down below or leave a question in the forums.


Sarang Avatar

5 responses


  1. talon1812 Avatar
    talon1812

    I get
    Error: Error Code = 0x2000,
    TOT antirollback is smaller than
    device version.
    Trying to roll back from Marshmallow
    to lollipop. There are way too many bugs in MM.
    Screen reverts back to 100% brightness on every re-boot, in dark, burns my retina out of my eyeballs. Can’t install apps from OTG thumb drive. Can’t download photos from Google+. It really sucks.
    ATT V10 here, H900

    1. Sarang Avatar
      Sarang

      Did you try the common.dll file?

      1. talon1812 Avatar
        talon1812

        YES.

  2. Arise Aristide Avatar
    Arise Aristide

    Hello greetings….please seems like the tot file h900 10f has been deleted…can u kindly help me with it.???am deadly restless

  3. bernardo Avatar
    bernardo

    hello, i need help to repair a mobile that i bought, and i repaired on my own. now i canยดt start android since i need the email and password of the previous owner. i canยดt bypass frp either because the phone stops with the message “com.android.settings.. has stopped. i would need kdz prior to firmware h90021w or later, do you have any?

Leave a Reply