LG V10 Marshmallow update

The Verizon LG V10 has been receiving Android 6.0 Marshmallow since last week and here we are with the latest KDZ file from LG Servers. Now, we have the Android 6.0 Marshmallow full firmware file for the Verizon LG V10 which will upgrade it to firmware version VS99022A. So hit the download section below and grab the KDZ and the upgrade tool. However before we proceed there is one thing that you should take note of is that, the bootloader unlock or root procedure are not yet available on Android M for the Verizon variant. Hence, you may not be able to root the firmware on Marshmallow. If you are looking for a downgrade to back to lollipop then make sure that you have the Lollipop KDZ full firmware.

With this tutorial, you can now clean update your Verizon deviceย with a full OEM ROM and restore it to complete stock. So whatever changes you may have done to your device, like root or custom Recovery etc, will be restored and bring you a brand new Android 6.0 software and a new LG UI. The KDZ comes with a firmware build number VS99022A and packs all the Marshmallow goodies like the Now on Tap, Doze Mode, App Permissions, and much more. The files come to us from the LG servers and has been captured from the file URL using LG Bridge. Hit the download section and proceed with the installation using the new LGUP method. You may also like Marshmallow firmware update to the two most popular LG devices viz,ย the LG G3, LG G4 and its variants.

Download Verizon LG V10 Marshmallow

[sociallocker]

  • Marshmallow for Verizon LG G4 KDZ VS98624C
    โ†’ Downloadย [Mirror]|ย File: VS99022A_06_0222.kdz
  • LGUPย Flashtool
    โ†’ Download|ย File: LGUPV10.rar

[/sociallocker]

Also See: Marshmallow for T-Mobile LG V10ย LG G4 Global &ย Sprint, T-Mobile LG G4, AT&T LG G4,ย LG G3,

Note:ย Before you proceed, backup everythingย as the procedure will perform a clean installation and remove all the apps, data, etc.

How to Install Marshmallow on Verizon LG V10 With Full KDZ VS99022A Using LGUP FlashTool

Step 1. Download both LGUP MSI filesย file from the download section above and install them on your PC. Also, downloadย the Stock 30B firmware and place where the LGUP is located.

Step 2. Boot your phone into Download Mode. To do so, disconnect USB cable then Power off the phone completely. Now hold Volume Up then plug in USB cable at the same time.

Step 3.ย Now open LGUP and select your phone model. If it says unknown, disconnect phone or reopen LGUP and try again.

LGUP-Flashtool-androidsage

Step 4.ย While LGUP is still open and your device connected with Download Mode, select the โ€œRefurbishโ€ option. If it fails, useย Upgrade. [Read notes from below]

Step 5. Now provideย the File Path and hit Start.

Step 5.ย Now wait for the installationย to finish.

Notes:ย 

TO UPGRADE TO MM from LP โ€“ Make sure BIN file is ticked and the File Path is set to the MM KDZ you have downloaded. Be sure to UPGRADE is checked. This will update you from LP to MM without wiping any of your data. Then Start the operation.

TO DO A FULL WIPE AND INSTALL MM โ€“ Open the LGUP on your computer. Provide the file path of the MM KDZ. Now this is important, Exit LGUP and run again once you set it as above. You will now notice that the MM KDZ will still be showing in the FILE PATH section. Now, select REFURBISH and make sure BIN file is ticked. Then Start the operation.

TO GO BACK TO LP FROM MM โ€“ Open the LGUP on your computer. Provide the file path of the MM KDZ. Now this is important, Exit LGUP and run again once you set it as above. You will now notice that the MM KDZ will still be showing in the FILE PATH section. Now, select REFURBISH and make sure BIN file is ticked. Then Start the operation.

If for any reason LGUP doesnโ€™t wipe your data or you want to wipe it yourself, thenย simply boot into stock recovery after the flash and run a factory reset from there. Follow and like us on social media. For queries either comment down below or leave a question in the forums.


Sarang Avatar


Leave a Reply