Marshmallow for Galaxy S6 Edge Plus

Earlier we brought to you Marshmallow update for several other Samsung Galaxy S6 Edge Plus variants including Korean, G928F, G928C, Sprint and much more. This time, the G928G is receiving the update in South Asia and some parts of South America. S6 Edge+ devices in countries like India, Argentina, Colombia, Panama, Sri Lanka, etc. are already running on Android 6.0.1 Marshmallow and the manufacturer is now releasing it on several devices. This is a jump from the Lollipop 5.1.1 to 6.0.1 and packs all the Marshmallow goodies. Other premium devices like Samsungย Galaxy S6, S6 Edge or Plus and Note 5ย are also being updated worldwide by Samsung. Now you can either wait for the OTA (over-the-air) update to hit your S6 Edge+ G928G, or download it manually from the download section below. The firmware build number G928GDDU2BPC4 brings Android version 6.0.1 and comes with several bug fixes, performance improvements and security enhancements.ย Firmware Details:ย Model SM-G928G, Model name Galaxy S6 edge+, Country Sri Lanka, Version Android 6.0.1, PDA G928GDDU2BPC4, CSC G928GODD2BPC5. you may also be interested in root access on Marshmallow.

Download Galaxy S6 Edge + Marshmallow

Before you proceed to the download section, you can either download the firmware directly from Samsung with a new tool without any speed restrictions or subscription from the first link or get it fromย third party websites from link 2.

  • Tool to Download Any Samsung Galaxy Stock Firmware
    โ†’ Download | Faster download method
  • Marshmallow for Galaxy S6 Edge Plus SM-G928G
    โ†’ Download [Mirror] |ย File: G928GDDU2BPC4_G928GODD2BPC5_SLK.zip
  • All firmware for Galaxy S6 Edge Plus SM-G928Gย โ†’ Link
  • Moreย Galaxy S6 Edge Plusย variants โ†’ย Linkย | Tool
  • Odin Software
    โ†’ Downloadย [Mirror] | File:ย Odin3_v3.10.7_3.zip
  • Samsung Galaxy Drivers
    โ†’ย Downloadย | File:ย SAMSUNG_USB_Driver_for_Mobile_Phones.zip (15.3MB)

Warning: Although going through this procedure should not cause harm or any damage to your device, it remains an unofficial process and you should be cautious about it. Readerโ€™s discretion is advised.

Prerequisites

1. Verify your device for compatibility. The listed firmware isย compatible with Samsung Galaxy S5 and several of its variants only. For other variants, check out the tool from this page.

2.ย Enable USB Debugging on your device. To do so, go to Settings>About Phone> Tap on the Build Number several times until you get a newย Developer Options in the Settings.ย Openย Developer Options and enable USB Debugging from there. Trust the connection by allowing it when you connect it to your PC for the first time.

3. Make sure you have latest device drivers setup on your PC for a better connection. Get it from the download section official from the manufacturer.

How to Install Marshmallow on Samsung Galaxy S5

Step 1: Downloadย the listed firmwareย for your for your Galaxy device. Extract the zip file to get the firmware with .tar or .tar.md5 extension and place at a location where you can easily locate it in yourย PC.ย 

Step 2:ย Now boot your device into Download/Odin Mode. To do so, turn off your device completely and then press and hold Power button + Volume Down + Home keys for a few seconds. Ifย you see a warning sign press Volume up/ Volume down to get the Odin screen.

Step 3: If you already have Odin software on your PC then simply runย the Odin3_3.10.7.exeย file. If not, then download the Odin3.zip file from the download section and extract it. Run Odin software as administrator.

Step 4:ย While your device is still in the Odin Mode, connect your device to your PC using a USB cable.

Step 5:ย After a successful connection, the ID: COM in the Odin shouldย turn Blue and an Added!!ย message should be displayed in the Log tab. In case your deviceย doesnโ€™t show up in Odin, then you can troubleshoot it with the steps given at the end of the tutorial.

Step 6: Now click onย AP button and addย the firmware file by navigating to the file path. Once added, it should showย like thisย โ€” File Path\G928GDDU2BPC4_G928GODD2BPC5_SLK.tar.md5

Step 7:ย Take care that only Auto Reboot and F.Reset Time are selected in the Options tab. Do not check Re-Partition.

Odin3_v3.10-androidsage-1

Step 8: Once done, verify everything and proceed with installation by selecting Start button.

Step 9: When you get a PASS! message in the Log tab on your Odin software, that means firmware has successfully been installed and the device will restart itself. If not then reboot manually.

Whenย ย you see the boot animation, you can enjoy your new firmware. Be patient as first boot may take a while. However, if the system doesnโ€™t boot up for a long time,ย then go through the following.

How to Fix Bootloop on Samsung Galaxy Device?

If you come across boot loop or your Samsung Galaxy device is stuck at the boot logo then factory reset your device from the recovery. To do so, turn of your device (also remove the battery if applicable and put it back again) and reboot into recovery mode byย press and holding Powerย + Volume down + Home keys for a few seconds. Fromย the Recovery, select Wipe Data / Factory Reset.ย Confirm the action and reboot once done. Your device should now boot up.

How to Troubleshoot Connectivity problem on Samsung Galaxy Device?

If your device doesnโ€™t show up in the Odin software, then turn off USB Debugging and turn it on again and Reboot. You can also reinstall the Samsung USB Drivers or tryย changing the USB cable and connection ports from device manager.

Follow, Like and share us on social media. For any help or queries, comment down below.


Sarang Avatar


Leave a Reply