A password will be e-mailed to you.

CyanogenMod has stepped into the support for the long forgotten Huawei Ascend Mate 2 with it’s latest CM 13 source, that will take your device to latest Android 6.0 Marshmallow firmware. Unfortunately, the device has not seen Android version greater than Jelly Bean. While some of its variants have received the Android 5.1 Lollipop firmware update, the update is meant for manual flash and not over the air.

Here is the official CyanogenMod 13 Nightly builds for your Huawei Ascend Mate 2. Hit the download section below and flash the ROM using a custom recovery. As the ROM comes officially, it can be expected as stable. The full ROM weighs around 287 MB and GApps package needs to be flashed separately.

We have already listed various Android devices receiving the CyanogenMod 13 port, either officially- click here or unofficially- click here. Download the ROM and follow the instructions carefully. You will need TWRP recovery setup on the device.

The latest stock firmware has also been listed below just in case if you wish to revert back to the stock firmware.

Warning: Once you root or install a custom ROM, your warranty may be void. We at AndroidSage won’t be liable for any damage to your Android device. We won’t be held responsible if you brick your device. Reader’s discretion is advised.

Downloads

Here is the Android 6.0 Marshmallow based CM 13 ROM and the official stock Lollipop firmware for your device:

Official CyanogenMod 13 (CM 13 ROM) for Galaxy S5
→ Download | File: cm-13.0-20151229-NIGHTLY-mt2.zip

Official Stock Firmware for Huawei Ascend Mate 2 Android 5.1
Download | Official Page [File: HUAWEI MT2-L03C00B322.rar]

Marshmallow Compatible Google Apps:
→ Open Google Apps → Link | File: open_gapps-arm-6.0-stock.zip
→ Dynamic Gapps → Link | File: BaNkS-Dynamic-GApps-6.x.x-11-21-2015.zip

Flash SuperUser for Root Access
→ SuperSU v2.60+ → Link | File: BETA-SuperSU-v2.67.zip

Prerequisites

1. Verify your device before you proceed. The listed CM 13 ROM is compatible with Huawei Ascend Mate 2 device only.

2. Make sure you have a custom recovery installed on your device. Latest build from TWRP is highly recommended. Get the TWRP

3. Make sure you have latest device drivers setup on your PC in order to transfer the files to your device’s internal storage. Get it from the official page of your device manufacturer.

4. Fully charge your device as the process make take a while.

How to Install CM 13 Nightly On Huawei Ascend Mate 2

Step 1: Download the ROM  of your choice from above. Also, download the Android 6.0 Marshmallow compatible Google Apps from the above download section. If you are looking for root after installation, download the SuperSU package from the list.

Step 2: Transfer all the necessary files to you device’s internal storage or SDcard. Place the files where you can easily locate it.

Step 3: Now boot into TWRP recovery. To do so, turn off your device completely and then press and hold the power button and volume down key for a few seconds. Once you see the TWRP logo, that means you have successfully booted into the recovery. Alternatively, if you have rooted device, then use Android apps like the Quick boot or Boot Smart.

Step 4: Once into TWRP, take a Nandroid backup. To do so, tap Backup option and select all the partitions including the system, data, boot, recovery, EFS and cache(optional).

Step 5: Now wipe the current system. To do so, return to home screen and tap the Wipe option in TWRP. Tap Advanced Wipe and select partitions like system, boot, data, cache, Dalvik cache. Do not, in any case, select internal storage, unless you know what you are doing.

Step 6: Now return to the home screen again and tap Install option. Navigate to the ROM file from your internal storage and select it.

Step 7: Now swipe right on the confirmation action button below to install the ROM.

Step 8: Once installed, go back and select the compatible Google apps zip file from the location in your internal storage.

Step 9: Once selected, swipe right on the confirmation action button below to flash them.

Step 10: Once installation completes, you can wipe the Dalvik cache or simply choose reboot to system option.

Step 11: Once you reboot, you should see the new boot logo. This means that the ROM has been installed successfully. First boot may take a while. If the ROM doesn’t boot or you come across boot loop, a factory reset from the recovery should do the trick. If that fails, you can restore your previous ROM from the TWRP recovery.

Like and share us on social media. If you need any help, then comment down below. Get in touch with us if you want to know more about TWRP installation or come across any errors.

Source: AndroidPolice, Huawei

Also See:

Install Official Marshmallow OTA For Moto G2 And G3, Android 6.0 OTA Capture

Related Posts:

Subscribe to Blog via Email

Join our mailing list to stay updated with Android.

Subscribe to new posts via Email

Like on Facebook:

Work with us: Contact Form